Peptide bond formation: how amino acids are joined, in cells and in the lab.

A peptide bond joins one amino acid's carboxyl group to the next one's amino group and releases water; ribosomes and chemists make it in different ways.

Basics7 min read

Key takeaway

A peptide bond is an amide bond between the carboxyl group of one amino acid and the amino group of another. Forming it removes the elements of water, so it is a condensation (dehydration) reaction. The bond is planar because of resonance. In cells, the ribosome builds chains from the N-terminus to the C-terminus, and the catalytic site is RNA: the ribosome is a ribozyme. In E. coli each amino acid takes about 0.05 seconds to add. In the lab, chemists protect the groups that should not react, activate the carboxyl group with a coupling reagent, and build the chain on a solid support, a method developed by Merrifield, who received the 1984 Nobel Prize in Chemistry.

At a glance

Article typeBasics
TopicPeptide science
Studies cited9
Related productsResearch peptide catalog

Peptide bond formation is the reaction that joins one amino acid to the next. The carboxyl group of one amino acid and the amino group of another form an amide bond, and a molecule of water is released. Cells do this on the ribosome. Chemists do it on a resin bead with coupling reagents. This guide covers the bond itself and both routes to it.

Quick answer: How is a peptide bond formed? The carboxyl group of one amino acid reacts with the amino group of the next to form an amide bond, and water is released. That makes it a condensation, or dehydration, reaction. In living cells the ribosome catalyzes it, using amino acids carried on transfer RNA. In the lab, chemists use protecting groups and coupling reagents, usually on a solid-phase resin.

What a peptide bond is

IUPAC defines a peptide as any compound produced by amide formation between a carboxyl group of one amino acid and an amino group of another. The amide bonds in peptides may be called peptide bonds. The usual case links the main carboxyl carbon of one amino acid to the alpha-amino nitrogen of the next. These are sometimes called eupeptide bonds. Residues linked by other amide bonds also count as peptides; those links are sometimes called isopeptide bonds.

The bond has a fixed geometry. The nitrogen’s lone pair is delocalized by resonance with the carbonyl group. That gives the C-N bond some double-bond character, restricts rotation around it, and makes the amide group planar. IUPAC’s conformation rules add that the trans arrangement, with a torsion angle near 180°, is the one generally found. Our guide to polypeptide structure explains how that flat unit shapes helices and sheets.

A condensation reaction

Forming a peptide bond releases water. OpenStax Biology 2e describes it plainly: one amino acid’s carboxyl group and the next amino acid’s amino group combine, releasing a water molecule, so peptide bond formation is a dehydration synthesis reaction. IUPAC’s definition of a residue says the same thing in other words. When amino acids combine to form a peptide, the elements of water are removed, and what remains of each amino acid is called an amino-acid residue.

That lost water matters for arithmetic. A peptide’s mass is the sum of its residues, not the sum of free amino acids, as worked through in peptide molecular weight.

The reverse reaction, hydrolysis, adds water back and cuts the bond. Cutting every bond on purpose takes harsh conditions: for amino acid analysis, the amide bonds are hydrolyzed by heating with 6 M hydrochloric acid at 110 °C for 24 hours. Slower cleavage still happens in storage. A review of solid-state stability lists peptide bond cleavage among the reactions that still occur in dry peptides, with moisture content as one controlling factor. Our guide to storing peptides covers why that matters for a vial.

How ribosomes build chains

Cells make peptide bonds during translation. The steps below follow OpenStax Biology 2e.

  • Charging. Enzymes called aminoacyl tRNA synthetases link each tRNA to its correct amino acid. They first hydrolyze ATP to form a high-energy bond between the amino acid and AMP, then transfer the activated amino acid to the tRNA.
  • Three sites. The ribosome’s A site binds the incoming charged tRNA. The P site holds the tRNA carrying the growing chain. The E site releases empty tRNAs.
  • The bond. Peptide bonds form between the amino group of the amino acid on the A-site tRNA and the carboxyl group of the amino acid on the P-site tRNA.
  • The energy. The energy for each peptide bond comes from the high-energy bond linking each amino acid to its tRNA. Elongation factors hydrolyze GTP to move the ribosome along.
  • The end. Translation stops at a nonsense codon: UAA, UAG or UGA.

The chain grows from the N-terminus to the C-terminus. It is fast: in E. coli, adding each amino acid takes about 0.05 seconds, so a 200-amino-acid protein can be made in about 10 seconds.

The catalyst is not a protein. The enzyme activity, peptidyl transferase, is RNA-based and built into the large ribosomal subunit. In 2000, Nissen and colleagues published atomic structures of the large subunit bound to substrate analogs and wrote: “we establish that the ribosome is a ribozyme.” They found no protein side-chain atoms closer than about 18 ångströms to the peptide bond being made.

How chemists form the bond

Making a defined peptide in a flask has one central problem. Each amino acid has both an amino group and a carboxyl group, and many amide bonds must form in a specific order rather than at random. The answer is protection. The groups that should not react are blocked, the desired amide bond is formed, and the block is removed before the next step.

  • Activation. Amide bond formation is typically mediated by a coupling reagent. The textbook examples are DCC and EDC. A 2009 review describes “a myriad of so-called coupling reagents.”
  • Protecting groups. Amino groups are protected as Boc or, more commonly, Fmoc derivatives. Carboxyl groups are often protected as methyl or benzyl esters. Boc is removed by brief treatment with a strong acid such as trifluoroacetic acid.
  • The solid support. In R. Bruce Merrifield’s solid-phase method, first reported in 1963, the C-terminal amino acid is attached to an insoluble polymer resin. Residues are then added one at a time. Because the growing chain stays on the resin until the last step, losses are small, and robotic synthesizers now repeat the coupling, washing and deprotection steps automatically.

OpenStax’s organic chemistry text says peptides of 20 amino acids can be routinely prepared in a few hours. A 2016 review calls Fmoc solid-phase synthesis the method of choice today, with multiton production of therapeutic peptides. The method reaches large targets too: ribonuclease, the enzyme used in classic protein-folding work, was synthesized in Merrifield’s laboratory.

For longer chains, chemists can join finished pieces. In native chemical ligation, described in 1994, two unprotected peptide segments react to form a thioester-linked intermediate. That intermediate rearranges on its own to give a full-length product with a native peptide bond at the join. The cycle, the cleavage step and the usual impurities are covered in how peptides are made.

Table 1

Two ways to make a peptide bond

Step Ribosome (in cells) Solid-phase synthesis (in the lab)
What sets the sequence Codons on the messenger RNA The order in which the chemist adds residues
How the carboxyl is activated ATP-driven charging of the amino acid onto its tRNA A coupling reagent, such as DCC or EDC
Catalyst Peptidyl transferase, an RNA-based site in the large subunit No enzyme; the chemistry is driven by reagents
Starting end N-terminus; the chain grows toward the C-terminus The C-terminal residue, anchored to the resin
Speed About 0.05 seconds per amino acid in E. coli A 20-residue peptide in a few hours

Vitrapep Research Catalog

Lyophilized COA per lot Research use only

Synthetic research peptides supplied as laboratory reference compounds, each lot with a third-party certificate of analysis. For laboratory research use only, not for human or veterinary use.

View the catalog

Frequently asked questions

What type of reaction forms a peptide bond?

A condensation, or dehydration synthesis, reaction. The carboxyl group of one amino acid and the amino group of the next form an amide bond, and water is released.

Which molecule is released when a peptide bond forms?

Water. IUPAC defines a residue as what remains of each amino acid after the elements of water are removed.

What forms peptide bonds in cells?

The ribosome. Its peptidyl transferase activity is RNA-based, which is why the ribosome is described as a ribozyme.

In which direction is a peptide chain built?

On the ribosome, from the N-terminus to the C-terminus. In solid-phase synthesis, the C-terminal residue is attached to the resin first and the chain is built from there.

Why is the peptide bond planar?

Resonance between the nitrogen’s lone pair and the carbonyl group gives the C-N bond partial double-bond character, which restricts rotation.

What to know now

  • The bond: an amide bond between one amino acid’s carboxyl group and the next one’s amino group.
  • The reaction: condensation; water is released, and hydrolysis reverses it.
  • The shape: planar, and usually trans.
  • In cells: the ribosome, an RNA catalyst, builds chains N to C, powered by ATP-charged tRNAs and GTP.
  • In the lab: protecting groups, coupling reagents and a solid-phase resin, starting from the C-terminal residue.
  • Longer chains: native chemical ligation joins unprotected segments with a native peptide bond.

Also in the library

Sources: IUPAC-IUB Joint Commission on Biochemical Nomenclature 1984, Pure and Applied Chemistry; IUPAC-IUB Commission on Biochemical Nomenclature 1974, Pure and Applied Chemistry; Clark 2018, Biology 2e; McMurry 2023, Organic Chemistry; Lai 1999, Journal of Pharmaceutical Sciences; Nissen 2000, Science; Merrifield 1963, Journal of the American Chemical Society; Valeur 2009, Chemical Society Reviews; Behrendt 2016, Journal of Peptide Science; Marshall 2008, Biopolymers; Dawson 1994, Science. All 11 citations

Back to the research library

References

  1. IUPAC-IUB Joint Commission on Biochemical Nomenclature. (1984). Nomenclature and symbolism for amino acids and peptides (Recommendations 1983). Pure and Applied Chemistry, 56(5), 595–624. https://doi.org/10.1351/pac198456050595. Sections 3AA-11 and 3AA-12, web version: https://iupac.qmul.ac.uk/AminoAcid/A1113.html
  2. IUPAC-IUB Commission on Biochemical Nomenclature. (1974). Abbreviations and symbols for the description of the conformation of polypeptide chains. Pure and Applied Chemistry, 40(3), 291–308. https://doi.org/10.1351/pac197440030291. Section 3, web version: https://iupac.qmul.ac.uk/misc/ppep3.html
  3. Clark, M. A., Douglas, M., & Choi, J. (2018). Biology 2e, sections 3.4 (Proteins) and 15.5 (Ribosomes and Protein Synthesis). OpenStax. https://openstax.org/books/biology-2e/pages/3-4-proteins; https://openstax.org/books/biology-2e/pages/15-5-ribosomes-and-protein-synthesis
  4. McMurry, J. (2023). Organic Chemistry, sections 26.4 (Peptides and Proteins), 26.5 (Amino Acid Analysis of Peptides), 26.7 (Peptide Synthesis) and 26.8 (Automated Peptide Synthesis: The Merrifield Solid-Phase Method). OpenStax. https://openstax.org/books/organic-chemistry/pages/26-4-peptides-and-proteins; https://openstax.org/books/organic-chemistry/pages/26-5-amino-acid-analysis-of-peptides; https://openstax.org/books/organic-chemistry/pages/26-7-peptide-synthesis; https://openstax.org/books/organic-chemistry/pages/26-8-automated-peptide-synthesis-the-merrifield-solid-phase-method
  5. Lai, M. C., & Topp, E. M. (1999). Solid-state chemical stability of proteins and peptides. Journal of Pharmaceutical Sciences, 88(5), 489–500. https://doi.org/10.1021/js980374e
  6. Nissen, P., Hansen, J., Ban, N., Moore, P. B., & Steitz, T. A. (2000). The structural basis of ribosome activity in peptide bond synthesis. Science, 289(5481), 920–930. https://doi.org/10.1126/science.289.5481.920
  7. Merrifield, R. B. (1963). Solid phase peptide synthesis. I. The synthesis of a tetrapeptide. Journal of the American Chemical Society, 85(14), 2149–2154. https://doi.org/10.1021/ja00897a025
  8. Valeur, E., & Bradley, M. (2009). Amide bond formation: Beyond the myth of coupling reagents. Chemical Society Reviews, 38(2), 606–631. https://doi.org/10.1039/b701677h
  9. Behrendt, R., White, P., & Offer, J. (2016). Advances in Fmoc solid-phase peptide synthesis. Journal of Peptide Science, 22(1), 4–27. https://doi.org/10.1002/psc.2836
  10. Marshall, G. R., Feng, J. A., & Kuster, D. J. (2008). Back to the future: Ribonuclease A. Biopolymers, 90(3), 259–277. https://doi.org/10.1002/bip.20845
  11. Dawson, P. E., Muir, T. W., Clark-Lewis, I., & Kent, S. B. (1994). Synthesis of proteins by native chemical ligation. Science, 266(5186), 776–779. https://doi.org/10.1126/science.7973629